Aresbond FR A2 – Aresbond U.S.A

ARESBOND FR-A2

General Info

With its A2-s1,d0 class- non-combustible mineral filled panels, Aresbond U.S.A provides highest fire rating which is mandatory for buildings 21,5 meters and above height according to European Regulations.
ARESBOND U.S.A FR-A2 panels are certified by one of the world’s leading certification institutions Exova Warrington Fire Center/UK, as A2-s1,d0 in accordance with EN 13501-1 standard.

At Aresbond FR-A2; flexibility, highest fire resistance, a wide range of colors&finishes and the highest quality production are all standard!

You will provide full fire protection to your building and will experience quality and reliability with Aresbond FR-A2 panels.

Product Specifications

Aresbond FR-A2 is a composite panel with a special inorganic mineral core sandwiched between two aluminum sheets of 0.50 mm thickness. The top sheet of the 4 mm-thick Alubond A2 composite panel is coated with PVDF Kynar 500 coating, while the bottom sheet is coated with a PE based service layer.
With its durable and non-flammable properties achieved through its superior surface performance and high mechanical strength, Aresbond FR-A2 is an essential building material in all prestigious projects.

Technical Specifications

General
Panel Thickness	:	4 mm - 5 mm - 6 mm
Panel Weight	:	8 kg/m2
Standard Width	:	1250/1500mm (up to 1600mm)
Standart Length	:	3200mm (up to 6000mm)
Aluminum Skin Thicknesses	:	0,5 mm / 0,5 mm
Top Skin
Coating	:	PVDF (min.25 microns)
Colors	:	Solid, Metallic, Wood, Special Wood, Stone, Prismatic, Sparkling, Real Anodized
Alloy	:	3105
Temper	:	H46
Bottom Skin
Coating	:	PE based service layer
Color	:	Light Gray
Alloy	:	3105
Temper	:	H46
Core	:	Inorganic, fire rated mineral filling, 3.0 mm thickness, class A2 (EN 13501-1/En ISO 1716)
Protective Film	:	Double-layered LDPE (polyethylene) based, UV-protective plastic film.
Packaging	:	Panels on ISPM 15 standard- wooden pallets, all sides covered with transparent nylon film.
Tolerances
Width	:	± 2,0 mm
Length	:	± 4,0 mm
Panel Thickness	:	± 0,2 mm
Alum. Thickness	:	± 0,05 mm
Bow	:	max. ± %0,8 either length or width
Squareness	:	max 5.0 mm
Surface	:	will be flat and smooth according to visual control criterias .
Edges	:	side edges are trimmed in order to maintain the same lamination (adhesion) strength at every point of each panel. There will be no excess of core or aluminum at the edges.

Top Surface Coating
The top skin surface of the aluminum composite panels will be coated with a minimum 25 micron-thick PVDF (polyvinylideneflouride) Kynar 500 paint which has high resistance against weather conditions, radiation, air and industrial pollution. PVDF coatings must be manufactured according to E.C.C.A (European Coil Coating Association) standards and this certification must be available upon request by the sub-contractor company. PVDF coating must be UV-resistant (RUV4) and must meet the requirements of the C3 type project zone. The gloss level must be between 25-40 according to the ECCA T2 (600) standard.

Bottom Surface Coating
The bottom surfaces will be coated with a 5-7 microns-thick, anti-corrosive PE (polyester) service paint.

SPECIFICATIONS		STANDARD	UNIT	VALUE
Mechanical Properties	Alloy	EN 573-3	….	EN AW- 3105
	Section modulus(W)	DIN 53293	cm³/m	1,7
	Rigidity (Poisson's ratio μ = 0,3)	DIN 53294	KN cm2 /m	2320
	Temper	EN 515	….	H26/H46
	Modulus of Elasticity	EN 1999 1-1	N/mm2	≥70000
	Tensile Strength of Aluminium	EN 485-2	N/mm2	Rm ≥ 175
	0.2% Proof Stress	EN 485-2	N/mm2	Rpo ≥ 150
	Elongation	EN 485-2	%	A 50 ≥ 2
	Linear Thermal Expansion	EN 1999 1-1	mm/m @100°C	2.4
Acoustical Properties	Sound absorbtion factor	TS EN ISO 354	ᵅw	0.05
Acoustical Properties	Sound transmission Loss (Rw)	ASTM E 90	dB	STC:27 OITC:22
Thermal Properties	Thermal resistance R		m² K/W	0.003
Thermal Properties	Temperature resistance	ASTM C 518	°C	-50….+80

Colors

Solid Renkler – 30 Standard Colors (Custom color development possible)
Metallic Colors – 18 Standard Colors (Custom color development possible)
Wood Series – 6 PUR-PA Coated Special Color
Special Wood Series – 12 PVDF Coated Special Textured, Anti-Scratched, Matte Surface
Stone Series – 6 PVDF Coated Special Colors
Real Anodized Series – 5 Standard Colors -Much longer life and beautiful appearance of natural metal on top surface
Special Effects – 6 Standard Colors - Sparkling and Prismatic Colors

Maintenance

Aresbond U.S.A composite panels are resistant against industrial zone conditions and they have self-cleaning properties in most environments. At all applications, in order to get a long lasting service life; panels must be washed with slightly hot water once a year, starting from top of the building to downwards. This will cleanse the surfaces from unwanted residue. Aresbond U.S.A panels are anti-static and repel dirt or residue for considerably longer periods than its alternatives.

Routine cleaning is strongly advised for panels. Cleaning must be done with only hot water and a little amount of surface cleaner, followed with rinsing. Frequency of cleaning usually varies according to the location of the building and the air pollution ratio. Cleaning with water is not advised when outside temperature is very high under the sun, because there could occur spots on surfaces due to rapid evaporation.

Quality

At Aresbond U.S.A, we ensure our product is made from the highest quality raw materials and superior technology giving Aresbond U.S.A panels durability, reliability and strength. Aresbond U.S.A has been fixed in the most demanding architectural structures, with the ability to withstand any and all weather conditions. With constant product R&D, we are able to continuously innovate and improve our product range and processes that have resulted in producing only the very best. We believe in giving an end product that is superior in quality and best in its price range.