General Info

Aresbond U.S.A Nano Premium series is a new generation composite panel, making a difference with its Nanotechnology coating which does not contain any toxic materials. Thanks to its technology, the products repel air pollution and environmental factors (dust, fumes, bacteria, carbon monoxide) and dirt. With their self-cleaning hydrophobic structure, they preserve the surface gloss and color tones for longer periods, they don't release any toxic gases to the environment during fire, and they are eco-friendly.

Product Advantages

Panel Thickness : 4mm - 5mm - 6mm
Panel Weight : -
 Standard Width : 1250mm (up to 1800mm)
Standard Length  : 3200mm (up to 6000mm)
Aluminum Skin Thicknesses : 0,5 mm / 0,5 mm
Top Skin
Coating : Special PVDF (min. 30 microns)
Colors : Solid, Metallic, Prismatic, Sparkling
Alloy : 3105
Temper : H46
Bottom skin
Coating : PE based service layer
Colors : Light Gray
Alloy : 3105
Temper : H46
Core : On customer's choice, A2/B/B1/B2
Protective Film : Double-layered LDPE (polyethylene) based, UV-protective plastic film.
Packaging : Panels on ISPM 15 standard- wooden pallets, all sides covered with transparent nylon film.
Width : ± 2,0 mm
Length :  ± 4,0 mm
Panel Thickness : ± 0,2 mm
Alum. Thickness : ± 0,05 mm
Bow : max. ± %0,8 either length or width
Squareness : max 5.0 mm
Surface : will be flat and smooth according to visual control criterias
Edges : side edges are trimmed in order to maintain the same lamination (adhesion) strength at every point of each panel. There will be no excess of core or aluminum at the edges.

Aresbond U.S.A composite panels are resistant against industrial zone conditions and they have self-cleaning properties in most environments. At all applications, in order to get a long lasting service life; panels must be washed with slightly hot water once a year, starting from top of the building to downwards. This will cleanse the surfaces from unwanted residue. Aresbond U.S.A panels are anti-static and repel dirt or residue for considerably longer periods than its alternatives.

Routine cleaning is strongly advised for panels. Cleaning must be done with only hot water and a little amount of surface cleaner, followed with rinsing. Frequency of cleaning usually varies according to the location of the building and the air pollution ratio. Cleaning with water is not advised when outside temperature is very high under the sun, because there could occur spots on surfaces due to rapid evaporation.

At Aresbond U.S.A, we ensure our product is made from the highest quality raw materials and superior technology giving Aresbond U.S.A panels durability, reliability and strength. Aresbond U.S.A has been fixed in the most demanding architectural structures, with the ability to withstand any and all weather conditions. With constant product R&D, we are able to continuously innovate and improve our product range and processes that have resulted in producing only the very best. We believe in giving an end product that is superior in quality and best in its price range.


Biz Dünyamızın daha güzel bir yer haline gelmesi için var gücümüzle çalışmaya devam edeceğimizi taahhüt ediyoruz.

Merkez Ofis

T: +90 (216) 488 16 01 (Pbx)

F: +90 (216) 488 16 03


Cevizli Mah. Saraylar Cad. DAP Vazo Kule No:6 C Blok Kat:8 Maltepe – İstanbul / TÜRKİYE


T: +90 (282) 746 14 20 (Pbx)


Veliköy Sanayi Bölgesi Osman Uzun Caddesi 20.Sok. Çerkezköy/TEKİRDAĞ

Aresbond U.S.A bir Aldom Grup İştirakidir. ∙ Bütün Hakları Saklıdır ∙ © 2023